An electrically heated hot tub designed to be kept constantly warm.
\nThe hot tub's basin is made of durable and easy-to-clean acrylic.<\/p>\n
The hot tub comes with a heating control center as standard, and we use high-quality Elecron heaters made in England.
\nThe control center has everything you need ready, all that remains on site is to connect the electricity.
\nThe 3 kW model has a built-in lighting plug. Make sure you have a free 16A fuse available.
\nThe 6 kW and 9 kW models have a 16A power plug ready, the plug is connected inside the hot tub casing. On site, you must drill a hole for the cable to go into the hot tub and then connect the plug to the end of the cable, which is connected to the hot tub plug.<\/p>\n
The control center has the following functions ready:
\n\u2013 Residual current protection
\n\u2013 Digital thermostat, with Wi-Fi control as standard, free mobile app download. Wi-Fi operation requires that the Wi-Fi network has sufficient range to reach the hot tub.
\n\u2013 The thermostat controls the heater and pump, so the pump does not run unnecessarily.
\n\u2013 In addition, the clock can be used to set the desired minimum filtration time for the filter to ensure that the water always remains clean.<\/p>\n
To ensure quality, each of our electric hot tubs is tested at the factory by filling it with water and running the equipment. This allows us to minimize the risk of leaks and ensure the functionality of the equipment before delivery to the customer.<\/p>\n
The hot tub is manufactured in Kurikka, South Ostrobothnia. It is made with a sturdy wooden frame that can be covered with vertical or horizontal coverings.<\/p>\n
The always-warm hot tub comes standard with Finnfoam insulation, a thick thermal cover, a sand filter, an electric heater, and an insulated enclosure for equipment.<\/p>\n
The standard is a 3 kW electric heater, which is sufficient for maintenance heating. Alternatively, a 6 kW heater is available if the hot tub is used heavily and the heat requirement is greater. The 9 kW heater is suitable for applications where the water needs to be changed frequently and the hot tub needs to be heated quickly.<\/p>\n
The hot tub is designed to be kept warm at all times, with an electric heater keeping the water at the right temperature. Just open the lid and take a dip.
\nElectricity consumption is approximately one euro per day when the hot tub is kept at 37 degrees. Consumption varies depending on usage. (Note: electricity prices have fluctuated significantly recently, more information about consumption can be found on our website in the FAQ section).<\/p>\n
Please contact us if you would like to order your hot tub with other equipment.<\/p>\n
The pool part of the hot tub has a 3-year warranty, and the filter and heater have a 2-year warranty.
\nDimensions: Outer dimensions 205 x 205 cm, inner diameter approximately 180 cm,
\nExternal height 112 cm, internal height 101 cm. The amount of water required is approximately 1650 liters.<\/p>\n
The price of the hot tub does not include the filter material to be placed in the filter. We recommend using filter balls in the filter. You can conveniently order them at the same time from this hot tub order page. We recommend that you also order the necessary chemicals for cleaning at the same time.<\/p>\n
Delivery time is currently 2 \u2013 4 weeks.<\/p>\n
Select invoice as the payment method and payment will only be processed after delivery.<\/p>\n
You can also order this hot tub model as a hybrid model, i.e. with combined electric and wood heating. Heat with wood and maintain with electricity.
\nThe location of the heater in the pool is freely selectable and all of our heater models can be connected to this hot tub.
\nJust add the stove you want to your shopping cart from the accessories menu and we will add it for the same price.
\nWe recommend ordering winter plugs for the stove at the same time, so you can plug the stove's outlets when the stove is not in use.<\/p>\n
Manufacturer:
\npaljupihaan.fi
\nE. Latvala Ltd.
\nKurikka
\n040-7209425<\/p>","protected":false},"excerpt":{"rendered":"
An electrically heated hot tub designed to be kept constantly warm.
\nThe hot tub's basin is made of durable and easy-to-clean acrylic.<\/p>\n
The hot tub comes with a heating control center as standard, and we use high-quality Elecron heaters made in England.
\nThe control center has everything you need ready, all that remains on site is to connect the electricity.
\nThe 3 kW model has a built-in lighting plug. Make sure you have a free 16A fuse available.
\nThe 6 kW and 9 kW models have a 16A power plug ready, the plug is connected inside the hot tub casing. On site, you must drill a hole for the cable to go into the hot tub and then connect the plug to the end of the cable, which is connected to the hot tub plug.<\/p>\n
The control center has the following functions ready:
\n\u2013 Residual current protection
\n\u2013 Digital thermostat, with Wi-Fi control as standard, free mobile app download. Wi-Fi operation requires that the Wi-Fi network has sufficient range to reach the hot tub.
\n\u2013 The thermostat controls the heater and pump, so the pump does not run unnecessarily.
\n\u2013 In addition, the clock can be used to set the desired minimum filtration time for the filter to ensure that the water always remains clean.<\/p>\n
To ensure quality, each of our electric hot tubs is tested at the factory by filling it with water and running the equipment. This allows us to minimize the risk of leaks and ensure the functionality of the equipment before delivery to the customer.<\/p>\n
The hot tub is manufactured in Kurikka, South Ostrobothnia. It is made with a sturdy wooden frame that can be covered with vertical or horizontal coverings.<\/p>\n
The always-warm hot tub comes standard with Finnfoam insulation, a thick thermal cover, a sand filter, an electric heater, and an insulated enclosure for equipment.<\/p>\n
The standard is a 3 kW electric heater, which is sufficient for maintenance heating. Alternatively, a 6 kW heater is available if the hot tub is used heavily and the heat requirement is greater. The 9 kW heater is suitable for applications where the water needs to be changed frequently and the hot tub needs to be heated quickly.<\/p>\n
The hot tub is designed to be kept warm at all times, with an electric heater keeping the water at the right temperature. Just open the lid and take a dip.
\nElectricity consumption is approximately one euro per day when the hot tub is kept at 37 degrees. Consumption varies depending on usage. (Note: electricity prices have fluctuated significantly recently, more information about consumption can be found on our website in the FAQ section).<\/p>\n
Please contact us if you would like to order your hot tub with other equipment.<\/p>\n
The pool part of the hot tub has a 3-year warranty, and the filter and heater have a 2-year warranty.
\nDimensions: Outer dimensions 205 x 205 cm, inner diameter approximately 180 cm,
\nExternal height 112 cm, internal height 101 cm. The amount of water required is approximately 1650 liters.<\/p>\n
The price of the hot tub does not include the filter material to be placed in the filter. We recommend using filter balls in the filter. You can conveniently order them at the same time from this hot tub order page. We recommend that you also order the necessary chemicals for cleaning at the same time.<\/p>\n
Download the hot tub user manual here:<\/p>\n