Hot tub water purifier, MyWater – SPA WATER CLEANER

Description

MyWater is a 100% chlorine-free cleaning agent developed and manufactured in Finland for hot tubs, outdoor jacuzzis and small swimming pools under 2000l.
– MyWater does not change the hardness or pH values of the water
– MyWater works regardless of pH value
– Using MyWater does not require laborious water measurement and adding various substances
– MyWater destroys all bacteria, viruses, algae and biofilm from pool water
– MyWater leaves pool water crystal clear
– MyWater is 100% chlorine-free cleaning agent
– MyWater is 100% environmentally friendly
– MyWater does not cause skin irritation or eye redness
– MyWater does not cause cloudiness and sedimentation in pool water
– MyWater does not support filters
– MyWater does not require separate chlorine or booster to work: Just mix the two substances in a 50ml and 50ml mixing bottle, nothing else is needed.
– MyWater effectively removes biofilm from the pipeline; when using MyWater, there is no need to clean the pipeline separately.
– Using MyWater can increase the filter and water replacement interval to up to 12 months
– With a weekly dose of MyWater, one package lasts 5 months. The most affordable 100% chlorine-free cleaning agent in terms of annual cost.

How MyWater works and its benefits for cleaning pool water and pipes
MyWater works based on an inorganic molecular compound formed by chlorine and oxygen. The substance reacts with water, as a result of which chlorine is removed from the water 100% and the oxygen molecule binds to the pool water, purifying the water.

Thanks to this:
– MyWater removes biofilm from pipes
– MyWater prevents the growth of viruses, fungi, algae and other pathogenic bacteria, such as the dangerous Legionella bacteria.
– MyWater is not a water conditioner, it is a cleaning agent
– MyWater is long-lasting, with a weekly dosage the substance lasts for 20 weeks 

Using MyWater:
– the service life of the filters is extended
– the water change interval is longer
– the water is always clear and smells clean
– the easiest to use, you don't need any other chemicals

Chemical use

1. Pour 50 ml of liquid from bottle A into the container provided.
   C-mixing bottle.
2. Pour 50 ml of liquid from bottle B into mixing bottle C.
   The water purifier is now activated and has changed
   yellowish.
3. Screw the cap on the C-mix bottle and shake.
   Gently. Then loosen the cap (the bottle will release
   gas). Wait 5 min. 
4. Pour the cleaner into the hot tub or bathtub. Make sure
   that the substance mixes with water. The water turns yellowish. 
5. Leave the substance to act for about 1 hour (time may vary)
   depending on the dirtiness of the water) – a jacuzzi or hot tub is
   ready to use when the yellowish color has disappeared. 

Rinse the C-mix bottle with water after each use. 

Repeat water purification every 1-2 weeks, depending on usage.